LFPB-60 Automatic Milling Machine

Product introduction:

LFPB-60 automatic milling machine can not only mill angles, but also mill the side end faces of plates. The angle is easy to shake by hand. According to the Italian 900 machining and milling principle, the designer of this machine uses imported milling cutter heads to install carbide cutters of different materials on the cutter heads for milling. This equipment has a large bevel for milling. It is easy to process carbon steel, stainless steel and other materials. It is suitable for large plates and plate brackets. The equipment can automatically move when milling. For small plates, namely, small plate cars, it can automatically move. This equipment is more flexible than the traditional gantry structure edge milling machine. It is not limited by the size of the site and plates. In comparison, it is not only cheap, but also convenient for maintenance, The movement of equipment in the workplace is more pleasant.

This equipment can be used to process the plywood with a thickness of less than 60mm and a slope width of 40mm for several times according to actual needs; The bevel angle can be adjusted arbitrarily within the range of 0 °to 60 °. The machine is suitable for welding bevels of carbon steel (including low alloy), stainless steel, aluminum plate, copper plate and other metal materials.

Key features:

1. Mechanical parts have undergone wear resistance treatment, hardness treatment, anti-corrosion treatment and stress relief treatment;

2. Structure: the whole plate is cut and then processed by machining center and plane grinding (greatly enhancing the strength and accuracy of the structure)

3.Completely zero cutting without changing material hardness;

4. During processing, the speed of the knob on the electric cabinet can be adjusted;

5. The efficiency of chamfering is 50 times higher than that of manual chamfering;

6. Structural performance is compact and simple operation;